The NanOsc Instruments line of broadband ferromagnetic resonance (FMR) spectrometers offer a simple turn-key solution to the burgeoning field of magnetodynamics research. Broadband FMR spectroscopy allows for measurements continuously spanning several 10’s of GHz. Measurements over a wide frequency range allow for significant improvements in accurately extracting a variety of material parameters not accessible by static measurement techniques. Broadband FMR is particularly well-suited for studying magnetic thin films, which not only form the backbone of fundamental spintronics and magnonics research but are also constituents of current and future technologies focused on magnetic memories, sensors, logic, and microwave signal processing.
Features
- Turn-key FMR spectrometer with easy to use software interface
- Broadband FMR using a coplanar waveguide
- Measures effective magnetization (Meff), anisotropy (K), gyromagnetic ratio (γ), damping (α), inhomogeneous broadening (ΔHO), exchange stiffness (A), inverse spin Hall effect (ISHE) voltage
Specifications
| Instrument | Bandwidth* | Temperature Range | Magnetic Field |
| PhaseFMR-8 | 2-8 GHz | Room Temperature | User Supplied Electromagnet / Power Supply |
| PhaseFMR | 2-18 GHz | ||
| PhaseFMR-40 | 2-40 GHz | ||
| CryoFMR-8 | 2-8 GHz | 4-400 K: PPMS / DynaCool
55-400 K: VersaLab 10-350 K: MI Cryostation |
±9, 14, 16 T: PPMS / DynaCool
±3 T: VersaLab ±0.7 T: MI Cryostation |
| CryoFMR | 2-18 GHz | ||
| CryoFMR-40 | 2-40 GHz |
Related products
Quantum Design
Quantum Design brings its 30+ years of low temperature instrumentation design to the development and manufacture of an innovative line of compressors and Gifford-McMahon (G-M) closed-cycle cryo-refrigerators. Variable speed energy efficiency, longer uninterrupted run times between servicing, and low vibration operation are all hallmarks of these cryogenic refrigeration products.
Quantum Design
These are self-sensing cantilevers without a tip (tipless, TL). This cantilever type is especially suitable for torque magnetometry, force sensing, gas property measurements, and many more applications. The free place where normally the AFM tip is located can be used to accept your own tip, glue a sample, or other uses. Normally, the cantilever is […]
Quantum Design
Single Quantum’s Eos X10 CS is a superconducting nanowire single photon detector (SNSPD) closed-cycle system with unparalleled detection efficiency in the near infrared spectrum.
Quantum Design
These are self-sensing cantilevers with a hard, sharp, long-life single crystal diamond tip (SCD). The cantilever is delivered on our cantilever PCB (CL-PCB) with a small 10 pin connector on its bottom side. This cantilever type can come with or without an integrated heater. PRSA (Piezo-Resistive Sensing & Active) cantilever probes are equipped with an […]
Quantum Design
neomicra’s smile2 e-beam lithography solution can be attached to any electron microscope or focused ion beam (FIB) microscope.
Quantum Design
Rainbow Photonics was founded as a spin-off company from the Nonlinear Optics Laboratory of the Swiss Federal Institute of Technology, ETH Zurich, in 1997. The company offers a series of novel terahertz instruments for imaging and spectroscopy.
Quantum Design
Designed to serve a variety of applications, Tweez finds its use ranging from physics to biology, from fundamental research to industrial applications.
Quantum Design
This is considered the standard type of self-sensing cantilever. It exhibits a sharp tip made of silicon with a tip radius of <15 nm. Normally, the cantilever is delivered on our cantilever PCB (CL-PCB) with a small 10 pin connector on its lower side. On request you can order only the Si chip without PCB […]