Add to Wishlist
RF303RS Electrosurgery Analyser

RF303RS Electrosurgery Analyser

Electrosurgery-device testing has never been easier than with the RF303RS.

Categories: ,

Electrosurgery-device testing has never been easier than with the RF303RS. User-selectable loads (50 to 750 Ω), signal averaging, battery power and portability make the RF303RS a very versatile tool for determining performance of multiple ESU “makes” and models.

Features

Standard Features 

  • New Signal Averaging Mode (SAMTM)
  • New RS232 port
  • Battery powered for completely isolated measurement
  • Digital display
  • HF-leakage-current measurement
  • 4-digit numeric LCD with backlight and power-save mode

Optional Features

 

  • All existing units upgradeable to the NEW RF303RS model

 

Specifications

Specifications
Modes of Operation
Line powered, battery powered, offline (battery maintenance charge)
Test Parameters
Power (W), HF/RF current (mA), test load (O)
Test-Load Selection
Monopolar and bipolar
Number of Selections: 15
Range: 50 O to 750 O
Step Size: 50 O
Accuracy: ± 4 % of selected value at 500 kHz
Current Measurement (Leakage)
Range: 30 mA to 2500 mA RMS
Resolution: 1 mA
Accuracy: ± 5.0 % of reading or ± 15 mA, whichever is greater (for monopolar cut)
Power Measurement (Output)
Range: 1 to 400 W
Resolution: 0.1 W
Accuracy: ± 10 % of reading or ± 3 W, whichever is greater (for monopolar cut)
Frequency Response
System Response: -3 dB points, 1k Hz to 2M Hz at 300 O
CQM Test
50 O to 750 O, 50-O steps (See “Test-Load Selection for additional specifications)
Oscilloscope Output
Transformer coupled output, uncalibrated
Connector Type: BNC
Battery
Type: Sealed lead-acid
Time Between Recharge: Two hours (continuous use)
Time to Full Charge: Eight hours
Number of Cycles: 200
Top Panel Input Connectors
Connector Type: 4 mm-diameter safety sockets
Input Voltage Limit: 10,000 V peak
Input CurrentLlimit: 3 A RMS
Dimensions
6 in H x 13.25 in W x 11.5 in D
(15.2 cm x 33.7 cm x 29.2 cm)
Weight
14.15 lb (5.6 kg)

 

Models and Accessories

Model Name Description
ESU303RS-US120V Electrosurgery Analyzers

All models include the following:

  • Users manual (3031000)
  • Accessory kit (safety leads) (one each – active safety lead (TEST LEAD), ESU dispersive safety lead (3010-0576), ESU RECQM safety lead (3010-0575), ESU case safety lead(TEST LEAD), two each – ESU jumper safety lead (3010-0578), Active safety clip yellow (2720-0005), Case safety clip green (2710-0006), Fuses (2) 5X20 F3.15A 250V CE (1005-0194), Ground pin adapter (9503-0004), and Detachable power cord (country specific)

 
ESU303RS-AUS250V Electrosurgery Analyzer, Australia, 250 V
ESU303RS-DEN250V Electrosurgery Analyzer, German, 250 V
ESU303RS-SHK250V Electrosurgery Analyzer, Schuko, 250 V
ESU303RS-ISR250V Electrosurgery Analyzer, Israel, 250 V
ESU303RS-ITAL250V Electrosurgery Analyzer, Italy, 250 V
ESU303RS-IND250V Electrosurgery Analyzer, India, 250 V
ESU303RS-SWZ250V Electrosurgery Analyzer, Switzerland, 250 V
ESU303RS-UK250V Electrosurgery Analyzer, United Kingdom, 250 V
ESU303RS-BRAZ250V Electrosurgery Analyzer, Brazil, 250 V

 

Test Leads, Probes and Clips
3030002 3030002 RF303 Accessory Kit (part# 2202009)
Contains all the leads and accessories required in one kit.
Works with the RF303 Electrosurgical Analyzer

 

Batteries, Chargers, and Power Supply
Battery 12V BATTERY, Secondary, Lead-Acid (part# 2211010)
(12V, 2.9AH, 178x35x60MM)

 

Cables
3370512 3370512 Dual 9DF serial cable (part# 2204472)
Special cable to attach to RS232 on a PC.
75034 RS232 Interface cable (DB9M to DB9F) (part# 2238659)
for medTester to RF303RS (RS-232; male DB9 to female DB9; adapter required, 49755FG, part# 2391789)

 

Carrying Cases
9530-0066 Multi-purpose Hard-sided Watertight Carrying Case
(part# 2248587)
(contains pick-and-pluck foam) (19 ” L x 14 ” W x 7 ¾ ” H)

 

Miscellaneous Accessories
49755FG Adapter DB9M-DB25F, (part# 2391789) (medTester to RF303RS) (male DB9 to female DB25; used with interface cable 75034)
ESU RECM BOX ESU RECM TEST BOX (part# 3782183)
Decade Box to Test REM function on ESU

 

Service Packages
Care Plans Request a quote

 

Related products

IDA-5 Infusion Pump Tester and Analyzer
Add to Wishlist
Quick View

Fluke Biomedical

IDA-5 Infusion Pump Tester and Analyzer

Fast, accurate and proven infusion device analyzer helps increase productivity

Based on sophisticated measurement technology trusted by biomedical professionals around the world, the IDA-5 is a multi-channel infusion device analyzer that can test up to 4 infusion pumps at once. The IDA-5 has built-in automation allowing users to create custom test templates for quick, standardized testing of IV pump devices with minimal user intervention.

VT900A fb-vt900a_01a_wfb-vt900a_11a_w_0
Add to Wishlist
Quick View

Fluke Biomedical

VT900A Gas Flow Analyzer

The VT900A Gas Flow Analyzer provides the highest accuracy for testing gas flow and respiratory medical equipment.

INCU II Incubator - Radiant Warmer Analyzerfb-incu-2_03a_ko_0
Add to Wishlist
Quick View

Fluke Biomedical

INCU II Incubator – Radiant Warmer Analyzer

Testing incubators and radiant warmers regularly is essential to validate their performance and ensure the safety and comfort of infants.
The Fluke Biomedical INCU II Incubator/Radiant Warmer Analyzer simplifies testing and verifying baby incubators, transport incubators, and radiant warmers are safe and conform to global IEC 60601-2-19 and IEC 60601-2-21 performance standards.

190M Medical ScopeMeter® Portable Oscilloscope
Add to Wishlist
Quick View

Fluke Biomedical

190M Medical ScopeMeter® Portable Oscilloscope

The 190M Medical ScopeMeter® Portable Oscilloscope is a high-performance, portable oscilloscope built upon the legacy of Fluke and Fluke Biomedical oscilloscopes in partnership with real customers like you.

ESA615 Electrical Safety Analyzer
Add to Wishlist
Quick View

Fluke Biomedical

ESA615 Electrical Safety Analyzer

The ESA615 brings fast and simple automated testing to a portable analyzer.

ProSim 4 Vital Signs Patient Simulator
Add to Wishlist
Quick View

Fluke Biomedical

ProSim 4 Vital Signs Patient Simulator

Designed to get you in and out of most locations in 60 seconds, this quick-check device tests 12-lead ECG, respiration, IBP and NIBP with an easy touch screen menu designed for troubleshooting fast. It is 90 % smaller and lighter than single-function patient simulators, provides one-tap testing for most patient monitor checks, and runs all day on a single battery charge.

VT650 Gas Flow Analyzer
Add to Wishlist
Quick View

Fluke Biomedical

VT650 Gas Flow Analyzer

View multiple gas flow measurements simultaneously, with traceability to global regulatory standards.

ESA609 Electrical Safety Analyzer
Add to Wishlist
Quick View

Fluke Biomedical

ESA609 Electrical Safety Analyzer

The ESA609 Electrical Safety Analyzer is a rugged, portable and easy-to-use analyzer designed for general electrical safety testing. Engineered for on-the-go technicians, the ESA609 requires no training to use and has a rubberized case that allows it to sustain the rigor of transportation, and helps prevent damage when accidentally dropped.