ProSim 2 and 3 Vital Signs Simulators - Image 2

ProSim 2 and 3 Vital Signs Simulators - Image 3

ProSim 2 and 3 Vital Signs Simulators - Image 4

ProSim 2 and 3 Vital Signs Simulators

The ProSim 2 and ProSim 3 Vital Signs Simulators are the clear choice for biomedical engineering and field service technicians that need a quality feature rich device with high portability.

Categories: Fluke Biomedical, Patient Simulators

Don’t need a comprehensive patient monitor tester? The ProSim 3 and 2 Vital Signs Simulators are the clear choice for biomedical engineering and field service technicians that need a quality feature rich device with high portability.

What makes the ProSim 3 and 2 the best choice for testing in the field?

Light weight and equipped with enough battery life to last a full work day
Field upgradeable firmware
Simple user interface and stay connected ECG posts
Streamlined cable requirements with updated DIN connectors that ensure ProSim family consistency
Easily pairs with SPOT Light and other devices for comprehensive testing.

Features

Key Features:

Portable patient simulator for evaluating the performance of patient monitors
20% lighter and 25% smaller than predicate devices
Just-right feature set includes ECG, pacemaker, arrhythmia and performance testing, respiration, invasive blood pressure, temperature, cardiac output (ProSim 3 only), fetal/maternal (ProSim 3 only)
43 high-quality ProSim 8 waveforms
With four IBP channels, ProSim 3 can test even the highest acuity scenarios
Improved hardware includes stay-connected ECG posts and upgraded DIN connectors
Simplified user interface with four button navigation
Field upgradeable, and easily paired with other devices for comprehensive testing

Specifications

General specifications
Temperature		Operating	10 °C to 40 °C (50 °F to +104 °F)
		Storage	-25 °C to +50 °C (-13 °F to +122 °F)
Humidity		10 % to 80 % non-condensing
Altitude		2,000 meters (6,562 ft)
Dimensions (LxWxH)		14.0 cm x 20.6 cm x 4.5 cm (5.5 in x 8.2 in x 1.8 in)
Display		LCD greyscale display
Communication		USB device upstream port
Power		Two 9 V alkaline batteries
Battery life		8 hours continuous operation
Weight		0.47 kg (1 lb, 4 oz)
Safety standards		IEC 61010-1, Pollution degree 2
Certifications		CE, CSA, C-TICK N 10140, RoHS
Electromagnetic compatibility (EMC)		IEC 61326-1; 2006
Detailed specifications
Normal-sinus-rhythm waveforms
ECG reference		The ECG amplitudes specified are for Lead II (calibration), from the baseline to the peak of the R wave. All other leads are proportional.
Normal sinus rhythm	12-lead configuration with independent outputs referenced to right leg (RL). Output to 10 universal ECG Jacks, color-coded to AHA and IEC Standards
Amplitude		0.05 mV to 0.45 mV (0.05 mV steps); 0.5 mV to 5.5 mV (0.5 mV steps)
Amplitude accuracy		± 2 % of setting Lead II. All other leads ± 5 %
ECG rate		30, 40, 45, 60, 80, 90, 100, 120, 140, 160, 180, 200, 220, 240, 260, 280 and 300 BPM
Rate accuracy	± 1 % of setting
ECG waveform selection		Adult (80 ms) or pediatric (40 ms) QRS duration
ST-segment elevation		Adult mode only: -0.8 mV to +0.8 mV (0.1 mV steps)
		Additional steps: +0.05 mV and -0.05 mV
Power-on default		80 BPM, 1.0 mV, adult QRS, ST-segment elevation of 0 mV, and a P-R interval of 0.16 seconds
Pacemaker waveform
Pacer pulse		Amplitude	0 (off), 1, 2, 5, 10 mV ± 10 % for lead II (reference lead) with other leads proportional as for performance waves.
		Accuracy	Reference lead II: ± (5 % setting + 0.2 mV)
Pacer pulse width		0.1, 0.5, 1.0, 1.5, 2.0 ms ± 5%
Paced arrhythmias		Atrial 80 BPM
		Asynchronous 75 BPM
		Demand with frequent sinus beats
		Demand with occasional sinus beats
		Atrio-ventricular sequential
		Noncapture (one time)
		Nonfunction
Power-on default		Off
Arrhythmia
Baseline NSR		80 BPM
PVC focus		Left focus, standard timing (except where specified)
Supraventricular arrhythmia		Atrial fibrillation (coarse or fine); atrial flutter sinus arrhythmia; missed beat (one time); atrial tachycardia; paroxysmal atrial tachycardia; nodal rhythm; and supraventricular tachycardia
Premature arrhythmia		(All one-time events) Premature atrial contraction (PAC); premature nodal contraction (PNC); PVC1 left ventricular; PVC1 left ventricular, early; PVC1 left ventricular, R on T; PVC2 right ventricularl PVC2 right ventricular, early; PVC2 right ventricular, R on T; and multifocal PVCs
Ventricular arrhythmia		PVCs 6, 12, or 24 per minute; frequent multifocal PVCs; bigeminy;trigeminy; multiple PVCs (one-time run of 2, 5, or 11 PVCs); ventricular tachycardia; ventricular fibrillation (coarse or fine); and asystole
Conduction defect	First-, second-, or third-degree AV block; and right- or left-bundle branchblock
Power-on default		None (off)
ECG performance testing
Amplitude		0.05 to 0.45 mV (0.05 mV steps), 0.5 to 5.5 mV (0.5 mV steps)
Pulse wave		30, 60 BPM, with 60 ms pulse width
Square wave		2.0, 0.125 Hz
Triangle wave		2.0, 2.5 Hz
Sine wave		0.5, 5, 10, 40, 50, 60, 100 Hz
R-wave detection wave form		Haver-Triangle
R-wave rate		30, 60, 80, 120, 200, and 250 BPM
R-wave width		20 to 200 ms (10 ms steps) Additional Steps: 8, 10, and 12 ms
Rate accuracy		± 1%
Amplitude accuracy		±(2 % of setting + 0.05 mV) , Lead II (Exception: ±5 % for R waves ≤20 ms)
Power-on default		None (off)
Fetal/Maternal ECG (ProSim 3 only)
Fetal heart rate (Fixed)		60, 90, 120, 140, 150, 210 and 240 BPM
Fetal heart rate (IUP)		140 BPM at beginning, then varies with pressure
Intrauterine-pressure waveforms		Early deceleration, late deceleration, and uniform acceleration
Wave duration		90 seconds, bell-shaped pressure curve, from 0 to 90 mmHg and returning to 0
IUP period		2, 3, or 5 minutes; and manual
Power-on default		FHR 120 BPM, early deceleration, manual
Invasive blood pressure
Channels		4, each independently settable with identical parameters and are individually electronically isolated from other signals
Input/output impedance		300 Ω ± 10 %
Exciter input range		2.0 to 16.0 V rms
Exciter-input frequency range		DC to 5000 Hz
Transducer sensitivity		5 or 40 μV/V/mmHg
Pressure accuracy		± 2 % of setting + 2 mmHg (valid for dc excitation only)
Static Levels, Channel 1		-10, 0, 80, 160, 240, 320, 400 mmHg
Static Levels, Channel 2		-10, 0, 50, 100, 150, 200, 240 mmHg
Static Levels, Channel 3 (ProSim 3 only)		-5, 0, 20, 40, 60, 80, 100 mmHg
Static Levels, Channel 4 (ProSim 3 only)		-5, 0, 20, 40, 60, 80, 100 mmHg
Dynamic waveforms, Channel 1		Arterial: 120/80, Radial Artery: 120/80, Left ventricle: 120/00, Right ventricle: 25/00
Dynamic waveforms, Channel 2		Arterial: 120/80, Radial artery: 120/80, Left ventricle: 120/00, Right atrium (central venous or CVP): 15/10, Right ventricle: 25/00, Pulmonary artery: 25/10, Pulmonary-artery wedge: 10/2, Left atrium: 14/4
Dynamic waveforms, Channel 3		Arterial: 120/80, Radial artery: 120/80, Left ventricle: 120/00, Right atrium (central venous or CVP): 15/10, Right ventricle: 25/00, Pulmonary artery: 25/10, Pulmonary-artery wedge: 10/2, Left atrium: 14/4
Dynamic waveforms, Channel 4		Swan-Ganz sequence, Right atrium (CVP), Right ventricle (RV), Pulmonary artery (PA), Pulmonary-artery wedge (PAW
Respiration artifact		BP delta changes from 3 to 16 mmHg
Output connector		DIN 5-Pin
Power-on default		0 mmHg
Respiration
Rate	0 (OFF), 15, 20, 30, 40, 60, 80, 100, 120 BrPM
Waves	Normal or ventilated
Ratio (inspiration: expiration)	1:1
Impedance variations (Δ Ω)	0.2, 0.5, 1 or 3 Ω peak-to-peak variation of lead impedance
Accuracy delta	± 10 %
Baseline	500, 1000, 1500, 2000 Ω, Leads I, II, III
Accuracy baseline	± 5 %
Respiration lead	LA or LL
Apnea selection	OFF, 12, 22 or 32 seconds (one-time events), or continuous (Apnea ON = respiration OFF)
Power-on default	20 BrPM, delta 1.0 Ω, 1000 Ω baseline
Temperature
Temperature	0 °C (32 °F), 24 °C (75.2 °F), 37 °F (98.6 °C), and 40 °C (104 °F)
Accuracy	± 0.1° C
Compatibility	Yellow Springs, Inc. (YSI) Series 400 and 700
Output connector	Circular DIN 4-pin
Power-on default	0 °C (42 °F)
Cardiac output
Catheter type	Baxter Edwards, 93a-131-7f
Calibration coefficient	0.542 (0 °C) injectate), 0.595 (24 °C injectate)
Blood temperature	37 °C (98.6 °F) ± 2 %
Injectate volume	10 cc
Injectate temperature	0 °C or 24 °C ± 2 % value
Cardiac output	2.5, 5, 10 liters per minute ± 5 %
Faulty-injectate curve	Waveform for simulation available
Left-to-right shunt curve	Waveform for simulation available
Calibrated pulse	1.5
Output connector	DIN 7-PIN
Power-on default	2.5 liters perminute, 0 °C injectate

Models and Accessories

Model Name

Description

ProSim 2 (4318341)

ProSim 2/3 Users Manual CD
Two 9-V alkaline batteries
IBP cable, unterminated
USB Cable
ProSim 2/3 Carrying Case
Power cord

ProSim 3 (4307790)

ProSim 2/3 Users Manual CD
Two 9-V alkaline batteries
IBP cable, unterminated
3010-0289FG, CI-3 Cable Assembly (Cardiac Output Box)
USB Cable
ProSim 2/3 Carrying Case
Power cord

Cables (IBP)
3010-0104	3010-0104 EM-1 BP cable (6ft) (6-pin) (part# 2198893) For use with the following: •GE Marquette Medical (PPG/E for M DR) •Witt Biomedical •Schiller PB Series
3010-0103	3010-0103 Datascope DS-1 BP cable (6F) (part# 2198887)
3010-0307	Fukuda Denshi (DS3300 series) FD-2 BP cable (12M) (12-pin orange) (part# 2199387)
3010-0357	GE Marquette Medical (Dash, Eagle, Solar, Tram and MacLab) MQ-3 BP cable (rectangular -11 M) (part# 2199627)
3010-0110	HP-3 BP cable (12M 5µV) 120 in, Mini-DIN to 12 pin HP/PH (part# 2198902) For use with the following: •Hewlett Packard/Philips (78-300, 78-500, 78-800, Merlin/Viridia/Omnicare) (HP/Philips M1006B iBP module has a sensitivity of 5 uv/V/mmHg only. Select the HP-3 cable for this application)
2392173	IBP cable, unterminated (part# 2392173)
3010-0122	GE Marquette Medical (7000 and TRAM-AR series only) MQ-2 (8M round) (7-pin) (part# 2198978)
MiniDIN/DIN IBP	Mini DIN to DIN IBP Adapter (part# 3408564) •Nihon Kohden Used to adapt PS420 or MPS450 blood pressure cables for use with ProSim series simulators.
3010-0116	PC-1 BP cable (6M) (6-pin) (part# 2198940) For use with the following: •Physio Control (VSM series) •Medical Data Electronics (Escort series)
3010-0584	DX-1 BP cable (10F) (10-pin) (part# 2200955) Used with the following: •Puritan Bennett PB 240 •Datex (AS/3, CS/3, Compact, Cardio Cap II, Critical Care, Light)
3010-0248	QM-1 (6M) Blood pressure cable (10-pin orange) (part# 2198925) for use with the following: •Quinton (Q Cath series) •Drager/Siemens (Some of Drager/Siemens monitors use the standard 10 pin Siemen connector, but newer models require Drager’s IBP Adapter 10 to 7 pin. Drager PN: 3368383)
3010-0114	SM-1 BP cable (10M) for Pro Sim 2/3, 4 or ProSim 8 (10-pin) (part# 2198925) •Drager/Siemens (SIRECUST series) (Use the SM-1 and the Siemens Medical Transducer Adapter (3368-383-E530U) to run a single invasive BP channel on the Siemens Medical SC6000 and SC9000 series monitors)
3010-0048FG	Universal unterminated UU-1 BP cable (5-Pin DIN one end only) (part# 2392173)

Batteries, Chargers, and Power Supply
2198785	AC Power Cord (Italy) 10A, 250V, CEI23-16 TO C13, 3X1MM, H05VVF, 2.5M, BLACK
2200241	AC Power Cord (Israel) 10A, 250V, SI1-16P TO C13, 3X1MM, H05VVF, 2.5M, BLACK
284174	AC Power Cord (USA) 10A, 125V, NEMA5-15 TO C13, 3X18AWG, SVT, 6FT, BLACK
4219453	AC/DC Power Supply for ProSim 2/3 (part# 4219453) 30w, 90-264 VAC, 15v@2A
658641	AC Power Cord (Australia) 10A, 250V, AS/NZS3112 TO C13, 3X1MM, H05VVF, 2.5M, BLACK
769422	AC Power Cord (Schuko) 10A, 250V, CEE7/7 TO C13, 3X1MM, H05VVF, 2M, BLACK
769448	AC Power Cord (Switzerland) 10A, 250V, SEV1011 TO C-13, 3X1MM, H05VVF, 2.5M, BLACK, 2.5M
769455	AC Power Cord (UK) IEC, 2.5M, 10A@250V
782771	AC Power Cord (India) 10A, 250V, SANS164-1 TO C13, 3X1MM, 2.5M, BLACK
2200218	AC Power Cord (Denmark) 250V, 10A, AFSNIT107-2-D1 TO C13, 3X1MM, 2.5M, BLACK
614487	Two 9-V alkaline batteries (614487)

Cables
3010-0284	COA-1 Cardiac output adapter (Hewlett Packard) 1/4 Phone plug to 4 pin female audio connector (HPT-2 also required for cardiac output simulation on HP patient-monitoring systems) (part# 2199240)
3010-0285	HPT-2 temperature adapter (2 pin) (part# 2199257) (Hewlett Packard/Philips)(used with UT-1 for HP monitors) (COA-1 also required for cardiac output simulation on HP patient-monitoring systems)
ProSim8-4402GECO	ProSim8-4402GECO Cardiac Output Switch for GE (Marquette Eagle) (part# 4022300) for use with ProSim 2/3 and ProSim 8
USB Cable	USB Cable • for ProSim 2 & 3 (part# 1671807) • for Impulse 6000D/7000DP (part# 1626219) • for IDA-1S (part# 1626219) • for IDA-5 (part# 4354452)
3010-0193	UT-2 Standard 1/4″ phone plug (compatible with YSI 700 series – 3 conductor) temperature cable (part# 2199019) Use with the following: •Spacelabs Ultraview (use adapter# 700-0031-00) •GE Marquette (use adapter# 402015-005 or 402015-004) •Welch Allyn/Propaq
UT-4	UT-4 Low profile, ¼ in phone plug, YSI 400 series compatible, two conductor (part# 2523334 or 3015280) •HP/Philips •SpaceLabs Ultraview (adapter# 700-0031-00) •GE Marquette Eagle/Dash/Solar (adapter# 402015-005 or 402015-004) •Drager Infinity •Welch Allyn/Propaq •Nihon Kohden (requires Nihon Kohden Smart Temperature Cable K961 for the latest series TR-6000)