Advanced Technology Liquefiers
Quantum Design's Advanced Technology Liquefiers (ATL) along with its innovative Helium Recovery, Storage & Purification Systems allow you to recover and liquefy the helium gas currently being lost from the normal boil off and helium transfers of your cryogenic instruments.
Quantum Design’s Advanced Technology Liquefiers (ATL) along with its innovative Helium Recovery, Storage & Purification Systems allow you to recover the helium gas currently being lost from the normal boil off and helium transfers of your cryogenic instruments.
Advanced Technology Liquefiers Provide:
- Easy-to-Use, Fully Automated Operation
- Portable Liquefiers for Easy Transfers
- High Liquefaction Rates; Energy Efficiency
- Self-Cleaning, Uninterrupted Service
- Modular Design: Your System Can Grow as Your Helium Needs Evolve
Models
ATL160
- Average Liquefaction Rate: 22 liters/day (0.92 liters/hr)*
- Dewar Capacity: 160 liters
- System Dimensions (L x W x H):
- 41 x 30 x 59 in (liquefier without compressor)
- Compressor Package Model: Split Air-Cooled or Water-Cooled
- Typical Power Consumption and Voltage Range: 6.5 – 7.5 KW; High & Low Voltage Available
- Gaseous Helium Requirement: Flow Rate: 0 – 25 SLPM (0 – 0.88 SCFM); Industrial Quality He (99.99%); 0-10 psi
- Fully Automated Touch Panel Control
ATL80
- Average Liquefaction Rate: 12 liters/day (0.50 liters/hr)*
- Dewar Capacity: 80 liters
- System Dimensions (L x W x H):
- 62 x 30 x 61 in
- Compressor Package Model: Air-Cooled
- Typical Power Consumption and Voltage Range: 3.8 – 5.4 KW; High & Low Voltage Available
- Gaseous Helium Requirement: Flow Rate: 0 – 25 SLPM (0 – 0.88 SCFM); Industrial Quality He (99.99%); 0-10 psi
- Fully Automated Touch Panel Control
Videos
Related products
Quantum Design
The MPMS 3 incorporates major advances in data acquisition, temperature control and magnetic field control with ≤10-8 emu sensitivity. The award- winning design of Quantum Design’s MPMS 3 also provides expanded software functionality within its user-friendly MultiVu interface.
Quantum Design
The NanoFrazor is a unique tool for rapid prototyping of 3D nano-structures and nano-devices. The patterning principle of the NanoFrazor technology is based on Thermal Scanning Probe Lithography (t-SPL) which originates from IBM Rueschlikon.
Quantum Design
Manufactured by GES Corporation, this tetra arc crystal furnace uses the Czochralski pulling method and four electric arcs to grow a wide range of metallic-conductive materials such as metallic compounds and high-temperature superconductors.
Quantum Design
Quantum Design's patented high-symmetry SQUID design and electronics provide the most rugged and sensitive all-thin-film sensors commercially available, and give you everything you need to configure flexible, powerful detection systems for your research.
Quantum Design
The PPMS DynaCool, Quantum Design’s latest development effort, uses a single two-stage Pulse Tube cooler to cool both the superconducting magnet and the temperature control system, providing a low vibration environment for sample measurements.
Quantum Design
The MicroWriter ML®3 products are a range of photolithography machines designed for rapid prototyping and small volume manufacturing in R&D laboratories and clean rooms.
Quantum Design
This is considered the standard type of self-sensing cantilever. It exhibits a sharp tip made of silicon with a tip radius of <15 nm. Normally, the cantilever is delivered on our cantilever PCB (CL-PCB) with a small 10 pin connector on its lower side. On request you can order only the Si chip without PCB […]
Quantum Design
These are self-sensing cantilevers with a hard, sharp, long-life single crystal diamond tip (SCD). The cantilever is delivered on our cantilever PCB (CL-PCB) with a small 10 pin connector on its bottom side. This cantilever type can come with or without an integrated heater. PRSA (Piezo-Resistive Sensing & Active) cantilever probes are equipped with an […]