RaySafe X2 X-ray measurement system

Your x-ray dosimeter solution, providing x-ray test and measurement sensors for R/F, MAM, CT, Survey, and light applications, including X2 View software.

Categories: Raysafe, X-Ray QA Instruments

X-ray dosimetry monitoring at your fingertips
We’ve grown accustomed to intuitive interactions with our devices. After all, it’s not the device that’s most important, but what you can achieve with it that matters. Simplicity has always been a hallmark for RaySafe. But simplicity on the outside requires a lot of work on the inside. Our simplicity comes from a careful balance of advanced sensor technology paired with electronic wizardry and intelligent signal processing. The result – a radiation dosimeter system that provides accurate X-ray measurements with the ultimate in user friendliness. Right at your fingertips.

Less effort. More insight.
Life is busier. There are more demands on your time. So you need to remove the unnecessary steps in taking X-ray measurements. Like positioning the sensor, choosing a setting, or interpreting the results. Fortunately, the X2 R/F sensor is orientation independent so the only thing you need to do is to place it in the X-ray beam and turn on the instrument. The rest is automatic – no menus, no selections.

Full range x-ray measurements
Ease-of-use means you get everything you need in one exposure, with one sensor – automatically. The RaySafe X2 offers X-ray measurement sensors for R/F, MAM, CT, Survey, and even light applications. Choose the sensors you need and add the ones you will need at a later stage. The X2 X-ray sensors are made without the need to select ranges or special modes. Most sensors also measure waveforms that can be analyzed directly on the base unit.

Intuitive interface and first-class precision
The RaySafe X2 X-ray measurement sensors and electronics are specifically designed to minimize the need for user interaction. A groundbreaking concept in sensor design and circuitry provides unsurpassed accuracy, reproducibility and sensitivity. Intelligent algorithms clearly indicate when a parameter is outside its specified range.

Finally, a built-in, self-test system ensures your system is in complete working order. This provides added peace of mind and further assures accurate measurements the first time and every time.

Features

All exposure data are saved in the X2 Base Unit. In each session, you can swipe to view measurement data from previous exposures for reference or comparison. A full session of measurements can easily be uploaded onto a PC at a later stage with help of the X2 View software.

The RaySafe X2 touch screen interface allows the user to view data in a comprehensive yet flexible way. The home screen displays every available parameter from the attached sensor. To zoom in on any parameter, just tap it for a larger view, and pinch to zoom into details. Use a quick swipe to display waveforms. Navigation is made simple by using common Menu, Home and Back keys. All exposures are saved in the base unit. In each session, you can swipe to quickly go back to previous exposures for reference or comparisons. A full session of X-ray measurements can be uploaded to the X2 View software at a later stage for more manipulation.

Specification

X2 General Specifications
EMC	According to IEC 61326-1
Safety	According to IEC 61010-1
X-Ray Meters Standard	Complies with IEC 61674
Exposures Needed	One
USB Cables	2 m (6.6 ft), 5 m (16.4 ft) and 5 m active extender
Size of Base Unit	34 x 85 x 154 mm (1.3 x 3.3 x 6.1 in)
Weight of Base Unit	521 g (18.4 oz)
Operating Temperature	15 – 35 °C (59 – 95 °F)
Storage temperature	-25 – 70 °C (-13 – 158 °F)
Power source	Rechargeable Li ion battery
Battery Time	~ 10 hours intensive usage
Battery tested	According to UN 38.3
Display	4.3″ LCD with capacitive touch
Memory	~ 10000 latest exposures
Software	X2 View for data handling and analysis. Also exports data to Microsoft Excel.
PTB Certificate	DE-17-M-PTB-0053

X2 mAs mAs
Range	0.001 – 9999 mAs
Resolution	0.001 mAs
Uncertainty	1 %
mA
Range (peak)	0.1 – 1500 mA
Resolution	0.01 mA
Uncertainty	1 %
Time
Range	1 ms – 999 s
Resolution	0.1 ms
Bandwidth	1 kHz
Uncertainty	0.5 %
Pulses
Range	1 – 9999 pulses
Resolution	1 pulse
Pulse rate
Range	0.1 – 200 pulses/s
Resolution	0.1 pulse/s
mAs/Pulse
Range	0.001 – 9999 mAs
Resolution	0.001 mAs
Uncertainty	1 %
Waveform
Resolution	125 μs*
Bandwidth	1 kHz

* automatically reduced for exposures longer than 3 s.

X2 R/F Sensor
Size of Detector	14 x 22 x 79 mm (0.5 x 0.9 x 3.1 in)
Weight	42 g (1.5 oz)
Active Compensation
Dose/dose rate	40 – 150 kVp, 1 – 14 mm Al HVL
kVp	40 – 150 kVp, up to 1 mm Cu
TF	60 – 120 kVp, up to 1 mm Cu
Dose
Range	1 nGy – 9999 Gy (0.1 μR – 9999 R)
Uncertainty	5 % or 5 nGy (0.5 μR)
Dose rate
Range	1 nGy/s – 500 mGy/s (5 μR/min – 3400 R/min)
Resolution	1 nGy/s (5 μR/min)
Trig level	50 nGy/s (340 μR/min)
Uncertainty	5 % or 10 nGy/s (70 μR/min) x duty cycle
kVp
Range	45 – 150 kVp
Minimum dose	50 μGy (6 mR)
Minimum dose rate (peak)	10 μGy/s (70 mR/min)
Uncertainty	2 %
HVL
Range	1 – 14 mm Al
Minimum dose	1 μGy (120 μR)
Minimum dose rate (peak)	0.5 μGy/s (3.5 mR/min) at > 70 kV 2.5 μGy/s (17 mR/min) at 50 kV
Uncertainty	10 %
Total filtration
Range	1.5 – 35 mm Al
Minimum dose	50 μGy (6 mR)
Minimum dose rate (peak)	10 μGy/s (70 mR/min)
Uncertainty	10 % or 0.3 mm Al
Time
Range	1 ms – 999 s
Resolution	0.1 ms
Bandwidth	4 Hz – 4 kHz* (*auto adjusted based on signal level)
Uncertainty	0.5 %
Pulses
Range	1 – 9999 pulses
Minimum dose rate (peak)	0.5 μGy/s (3.5 mR/min)
Pulse rate
Range	0.1 – 200 pulses/s
Minimum dose rate (peak)	0.5 μGy/s (3.5 mR/min )
Dose/pulse
Range	1 nGy/pulse – 999 Gy/pulse (0.1 μR/pulse – 999 R/pulse)
Minimum dose rate (peak)	0.5 μGy/s (3.5 mR/min)
Waveforms
Resolution	62.5 μs*
Bandwidth kV	0.1 – 0.4 kHz**
Bandwidth dose rate	4 Hz – 4 kHz**

* automatically reduced for exposures longer than 1.5 s
** automatically adjusted depending on signal level

X2 MAM Sensor
Size detector	14 x 22 x 79 mm (0.5 x 0.9 x 3.1 in)
Weight	42 g (1.5 oz)
Active Compensation – Beam quality independent for the following ranges:
Dose/dose rate & HVL (No selections needed. With or without paddle or phantom.)
Mo/Mo, Mo/Rh	20 – 40 kVp
Rh/Ag	27 – 40 kVp
Mo/Al, W/Rh, W/Ag, W/Al, Rh/Rh, Rh/Al	20 – 50 kVp
Mo/Cu, Rh/Cu, W/Cu, W/Ti	40 – 50 kVp
kVp (User selectable beam qualities. Paddle compensation available when relevant.)
W/Ag	20 – 40 kVp
W/Al	20 – 50 kVp Measuring over 40 kVp requires an X2 R/F Sensor + 2 mm Al (incl.)
W/Rh	20 – 40 kVp
Mo/Mo	20 – 40 kVp
Mo/Rh	32 – 40 kVp using + 2 mm Al (incl)
Rh/Ag	27 – 40 kVp
Mo/Cu, W/Cu, W/Ti	40 – 50 kVp, using the X2 R/F Sensor
Dose
Range	1 μGy – 9999 Gy (0.1 mR – 9999 R)
Uncertainty	5 %
Dose Rate
Range	10 μGy/s – 300 mGy/s (70 mR/min – 2000 R/min)
Uncertainty	5 %
kVp
Range	20 – 50 kVp* Measuring above 40 kVp requires an X2 R/F Sensor and on W/Al +2 mm Al (incl.) (*depending on beam quality, see active compensation)
Minimum dose	50 μGy (6 mR)
Minimum dose rate (peak)	10 μGy/s (70 mR/min)
Uncertainty	2 % or 0.5 kV (without paddle) 2 % or 0.7 kV (with paddle)
HVL
Range	0.2 – 3.6 mm Al
Minimum dose	1 μGy (0.1 mR)
Uncertainty	5 % above 25 kV; 10% below 25 kV
Time
Range	1 ms – 999 s
Resolution	0.1 ms
Bandwidth	400 Hz
Uncertainty	0.5 %
Pulses
Range	1 – 9999 pulses
Pulse rate
Range	0.1 – 200 pulses/s
Dose/pulse
Range	1 μGy/pulse – 999 Gy/pulse (0.1 mR/pulse – 999 R/pulse)
Waveforms
Resolution	62.5 μs*
Bandwidth	400 Hz

* automatically reduced for exposures longer than 1.5 s

X2 Light Sensor
Weight	136 g (4.8 oz)
Size	48 x 60 x 68 mm (1.9 x 2.4 x 2.7 in)
Classification	DIN 5032 part 7 class B
Standards	Complies with relevant parts of AAPM TG18, IEC 62563-1 and IEC 61223-2-5.
Luminance
Range	0.01 – 10 000 cd/m² (0.03 – 34 000 fL)
Resolution	0.001 cd/m² (0.001 fL)
Aperture angle	5°
Measurement area	Ø 10 mm (0.4 in)
Uncertainty illuminant A	3%
Deviation from human eye V(λ) (f₁’)	< 3 % (see figure Photopic Response)
Illuminance
Range	0.1 – 100 000 lux (0.01 – 9000 fc)
Resolution	0.01 lux (0.001 fc)
Uncertainty illuminant A	3%
Deviation from human eye V(λ) (f₁’)	< 3 % (see figure Photopic Response)
Cosine deviation (f₂)	< 3 % (see figure Cosine Response)

X2 Survey Sensor
Dimensions	14 x 66 x 192 mm (0.5 x 2.6 x 7.6 in)
Weight	140 g (4.9 oz)
Active Compensation	H*(10) – when selecting Sv Air kerma – when selecting Gy or R
Trig Modes
Manual	Manual start and stop of measurement
Auto	Trig level (N80): 10 μGy/h (1.2 mR/h) or 20 μSv/h
*H(10)**
Range	0 nSv – 9999 Sv
Resolution	1 nSv
Uncertainty	10 %, N-series 20 – 150 kV
*H(10) Rate**
Range	0 μSv/h – 150 mSv/h
Uncertainty	10 % or 0.3 μSv/h, N-series 20 – 150 kV
Air Kerma
Range	0 nGy – 9999 Gy (0 μR – 9999 R)
Resolution	1 nGy (0.1 μR)
Uncertainty	5 %, RQA 50 – 150 kV 10 %, N-series 40 – 150 kV
Air Kerma Rate
Range	0 μGy/h – 100 mGy/h (0 mR/h – 10 R/h)
Uncertainty	5 % or 0.3 μGy/h (0.03 mR/h), RQA 50 – 150 kV 10% or 0.3 μGy/h (0.03 mR/h), N-series 40 – 150 kV
Mean Energy
Range	30 – 120 keV
Uncertainty	10 %
Minimum Dose Rate	10 μSv/h or 10 μGy/h (1 mR/h)
Defining Standard	ISO 4037-1
Time
Range	0.1 – 9999 s
Resolution	0.01 s
Bandwidth	1 Hz
Waveform
Range	10 ms
Bandwidth	1 Hz
Minimum Dose Rate	1 μSv/h or 1 μGy/h (0.1 mR/h)

X2 CT Sensor
Size	14 x 22 x 219 mm (0.5 x 0.9 x 8.6 in)
Weight	86 g (3.0 oz)
Size Ø	12.0 mm (0.47 in)
Standard	For measurements in accordance with IEC 60601-2-44
Active length	100 mm (3.94 in)
Energy dependence	< 5 % for 70 – 150 kV (RQR, RQA and RQT beam qualities)
Automatic environmental compensation	55 – 110 kPa, 15 – 35 °C (59 – 95 °F)
Dose
Range	10 μGy – 999 Gy (1 mR – 999 R)
Uncertainty	5 %
Dose length product
Range	100 μGycm – 9999 Gycm (10 mRcm – 9999 Rcm)
Uncertainty	5 %
Dose Rate
Range	10 μGy/s – 250 mGy/s (70 mR/min – 1700 R/min)
Uncertainty	5 %
Time
Range	10 ms – 999 s
Resolution	1 ms
Bandwidth	10 Hz
Uncertainty	0.5 %
Waveforms
Resolution	1 ms
Bandwidth	10 Hz

Models and Accessories

Model Name	Description	Price List
1506013	RaySafe X2 Prestige – 1506013 Includes X2 Base unit with mAs, X2 View software, and the following: X2 R/F Sensor X2 MAM Sensor X2 CT Sensor X2 Light Sensor
1506014	RaySafe X2 Prestige – 1506014 Includes X2 Base unit, X2 View software, and the following: X2 R/F Sensor X2 MAM Sensor X2 CT Sensor X2 Light Sensor
1506035	RaySafe X2 Prestige -1506035 Includes X2 Base unit with mAs, X2 View software, and the following: X2 R/F Sensor X2 MAM Sensor X2 CT Sensor X2 Survey Sensor
1506036	RaySafe X2 Prestige -1506036 Includes X2 Base unit, X2 View software, and the following: X2 R/F Sensor X2 MAM Sensor X2 CT Sensor X2 Survey Sensor
1506037	RaySafe X2 Prestige -1506037 Includes X2 Base unit with mAs, X2 View software, and the following: X2 R/F Sensor X2 MAM Sensor X2 Light Sensor X2 Survey Sensor
1506038	RaySafe X2 Prestige -1506038 Includes X2 Base unit, X2 View software, and the following: X2 R/F Sensor X2 MAM Sensor X2 Light Sensor X2 Survey Sensor

Service Packages
Care Plans	Request a quote

RaySafe X2 X-ray measurement system

Features

Specification

Models and Accessories

Video

Related products

Login