The NanOsc Instruments line of broadband ferromagnetic resonance (FMR) spectrometers offer a simple turn-key solution to the burgeoning field of magnetodynamics research. Broadband FMR spectroscopy allows for measurements continuously spanning several 10’s of GHz. Measurements over a wide frequency range allow for significant improvements in accurately extracting a variety of material parameters not accessible by static measurement techniques. Broadband FMR is particularly well-suited for studying magnetic thin films, which not only form the backbone of fundamental spintronics and magnonics research but are also constituents of current and future technologies focused on magnetic memories, sensors, logic, and microwave signal processing.
- Turn-key FMR spectrometer with easy to use software interface
- Broadband FMR using a coplanar waveguide
- Measures effective magnetization (Meff), anisotropy (K), gyromagnetic ratio (γ), damping (α), inhomogeneous broadening (ΔHO), exchange stiffness (A), inverse spin Hall effect (ISHE) voltage
|Instrument||Bandwidth*||Temperature Range||Magnetic Field|
|PhaseFMR-8||2-8 GHz||Room Temperature||User Supplied
Electromagnet / Power Supply
|CryoFMR-8||2-8 GHz||4-400 K: PPMS / DynaCool
55-400 K: VersaLab
10-350 K: MI Cryostation
|±9, 14, 16 T: PPMS / DynaCool
±3 T: VersaLab
±0.7 T: MI Cryostation
These are self-sensing cantilevers with a hard, sharp, long-life single crystal diamond tip (SCD). The cantilever is delivered on our cantilever PCB (CL-PCB) with a small 10 pin connector on its bottom side. This cantilever type can come with or without an integrated heater. PRSA (Piezo-Resistive Sensing & Active) cantilever probes are equipped with an […]
The MPMS 3 incorporates major advances in data acquisition, temperature control and magnetic field control with ≤10-8 emu sensitivity. The award- winning design of Quantum Design’s MPMS 3 also provides expanded software functionality within its user-friendly MultiVu interface.
This is considered the standard type of self-sensing cantilever. It exhibits a sharp tip made of silicon with a tip radius of <15 nm. Normally, the cantilever is delivered on our cantilever PCB (CL-PCB) with a small 10 pin connector on its lower side. On request you can order only the Si chip without PCB […]
Quantum Design introduces its first portable, cryogen-free cryocooler-based material characterization platform – VersaLab. With a temperature range of 50 – 400K, this 3 tesla platform is perfect for accomplishing many types of materials characterization in a limited space.
These are self-sensing cantilevers without a tip (tipless, TL). This cantilever type is especially suitable for torque magnetometry, force sensing, gas property measurements, and many more applications. The free place where normally the AFM tip is located can be used to accept your own tip, glue a sample, or other uses. Normally, the cantilever is […]