Impulse 6000D Defibrillator Analyzer

The Impulse 6000D model is a Defibrillator Analyzer is a portable, rugged, easy-to-carry device with an intuitive user interface, backlight, and easy-to-read display.

Categories: Defibrillator Analysers, Fluke Biomedical

Impulse 6000D Defibrillator Analyzer

Fluke Biomedical defibrillator analyzers ensure proper operation and ultimate performance of critical life-support cardiac-resuscitation equipment, including mono- and bi-phasic defibrillators and AEDs. These best-in-class defibrillators offer test capabilities that encompass a global spectrum of established pulse shapes, feature breakthrough AED technology compatibility, and deliver superior performance with accuracy readings ± 1% of reading +0.1J.

The Impulse 6000D model is a Defibrillator Analyzer is a portable, rugged, easy-to-carry device with an intuitive user interface, backlight, and easy-to-read display. With functionality that includes energy output measurement and ECG wave testing, the Impulse 6000D features 10 independent ECG outputs that provide 12 lead combinations for standardized clinical signals.

Ansur test automation may be purchased in order to standardize test procedures, capture waveforms and test results, and evolve with increasing requirements for electronic data storage.

*Please Note:
The Impulse 6000D is not compatible with the 7010 Load Accessory.

Features

IEC 60601-2-4 Compliance
Lown, Edmark, trapezoidal, biphasic and pulsed-biphasic defibrillation technology compatibility
AED compatibility
12-lead ECG simulation
Internal pacer brand selections
Flexible heart-rate settings (1BPM step)
DSP-based measurements for firmware and waveform upgrade
Waveform capture, store and replay
First-in-class accuracy ± 1% of reading + 0.1J
Long lasting, rechargeable battery

Specifications

General Specifications
Temperature, Operating	10 °C to 40 °C (50 °F to 104 °F)
Temperature, Storage	-20 °C to +60 °C (-4 °F to +140 °F)
Humidity	10 % to 90 % non-condensing
Display	LCD display
Communications	USB device port for computer control
Modes of Operation	Manual and remote
Power	Internal rechargeable NiMH battery pack for nine hours (typical) operation after full charge or the battery charger can operate the analyzer and charge the battery simultaneously
Battery Charger	100 V to 240 V input, 15 V/1.5 V A output. For best performance, the battery charger should be connected to a properly grounded ac receptacle
Enclosure	ABS plastic housing
Dimensions	32 cm x 24 cm x 13 cm
	(13 in x 9.5 in x 5 in)
Weight	3.02 kg (6.6 lb, 0.1 oz)
Safety Standards	CE: IEC/EN61010-1 2nd Edition; Pollution degree 2 CAN/CSA-C22.2 No. 61010-1; UL61010-1 C-Tick: Australian EMC

Energy Output Measurement Specifications

Compatible Defibrillator Waveshapes

	Lown, Edmark, Trapezoidal, DC Bi-phasic, and AC Pulsed Bi-phasic
	AC Pulsed Biphasic waveform has not been approved in the United States.

Auto-ranged Measurement

0.1 J to 600 J

Accuracy

± (1 % of reading + 0.1 J)

Load Resistance

Resistance	50 Ω
Accuracy	±1 %, non-inductive (<2 µH)

Pulse Trigger Level

20 V

Pulse Width

Range	1 ms to 50 ms
Accuracy	±0.1 ms

Voltage

Range	20 V to 5000 V
Accuracy	± (1 % of reading + 2 V)

Current

Range	0.4 A to 100 A
Accuracy	± (1 % of reading + 0.1 A)

Tilt (Biphasic and Pulsed Biphasic)

Range	1 % to 99 %
Accuracy	± 1 digit

Interphase Delay (Biphasic and Pulsed Biphasic)

Range	0.1 ms to 9.9 ms
Accuracy	± 0.1 ms

Frequency (Pulsed Biphasic Only)

Range	2000 Hz to 8000 Hz
Accuracy	± 1 % of reading

Duty Cycle (Pulsed Biphasic Only)

Range	1 % to 99 %
Accuracy	± digit

Sample Rate

250 kHz (4 µs sample)

Maximum Average Power

12 W, equivalent to 10 defib pulses of 360 J every 5 minutes

Scope Output

Autorange:2000:1, 400:1 and 80:1: dependant on the range

Waveform Playback

Output: BNC
Output impedance: 50 Ω
Amplitude Accuracy: ± 5 %

Charge Time Measurement

Range	0.1 s to 100 s
Accuracy	± 0.05 s, typical

Synchronization Test (Elective Cardioversion)

Delay Time Measurement	Timing window: : ECG R-wave peak to the defib pulse peak
	Range: -120 to +380 ms; measures timing from 120 ms prior to the R-wave peak to up to 380 ms following the R-wave peak
	Resolution: 1 ms
	Accuracy: ± 1 ms
ECG waves	Normal Sinus Rhythm (NSR): 10 BPM to 180 BPM, in 1 BPM steps
	Atrial fibrillation: Coarse and fine
	Monomorphic Ventricular Tachycardia: 120 BPM to 240 BPM, in 5 BPM steps
	Asystole: Flat line

Automated Defibrillator Test ECG Waves

Normal Sinus	10 BPM to 300 BPM, in 1 BPM steps
Ventricular Fibrillation	Coarse and fine
Monomorphic Ventricular Tachycardia	120 BPM to 300 BPM, in 1 BPM steps
Polymorphic Ventricular Tachycardia	5 types
Asystole	Flat line

ECG Waves

ECG General

Lead configuration	12-lead simulation. RA, LL, LA, RL, V1-6 with independent signal outputs
Lead-to-lead impedance	1000 Ω (nominal)
Rate accuracy	± 1 % of nominal

ECG Amplitudes

Reference lead	Selectable, Lead II (default) or Lead 1
Settings	0.05 mV to 0.45 mV, in 0.05 mV steps 0.5 mV to 5 mV, in 0.5 mV steps
Accuracy (All Performance waves and Normal Sinus R waves)	Lead II: ± 2 % All other leads: ± 5 % Defib paddles: ± 5 %
Amplitude of ECG signals relative to amplitude setting (in percent)	Lead II reference:
	Performance waves and R wave detection
	Lead I – 70 %
	Lead II – 100 %
	Lead III – 30 %
	Lead V1 – 100%
	Lead V2 – 100%
	Lead V3 – 100 %
	Lead V4 – 100 %
	Lead V5 – 100 %
	Lead V6 – 100 %
	Normal Sinus waves
	Lead I – 70 %
	Lead II – 100 %
	Lead III – 30 %
	Lead V1 – 24%
	Lead V2 – 48%
	Lead V3 – 100 %
	Lead V4 – 120 %
	Lead V5 – 112 %
	Lead V6 – 80 %
	Lead I reference:
	Performance waves and R wave detection
	Lead I – 100 %
	Lead II – 150 %
	Lead III – 50 %
	Lead V1 – 100%
	Lead V2 – 100%
	Lead V3 – 100 %
	Lead V4 – 100 %
	Lead V5 – 100 %
	Lead V6 – 100 %
	Normal Sinus waves
	Lead I – 100 %
	Lead II – 150 %
	Lead III – 50 %
	Lead V1 – 24%
	Lead V2 – 48%
	Lead V3 – 100 %
	Lead V4 – 120 %
	Lead V5 – 112 %
	Lead V6 – 80 %

ECG Normal Sinus

Rates

10 BPM to 360 BPM, in 1 BPM steps

ECG High Level Output (BNC Jack)

Amplitude Range	0.5 V/mV of reference lead setting
Accuracy	± 5 %
Output Impedance:	50 Ω

ECG On Cefibrillator Input Load

Same as the Lead II amplitude but limited to ± 4 mV

ECG Performance Waves

Square wave	2 Hz and 0.125 Hz
Triangular wave	2 Hz and 2.5 Hz
Sine waves	0.05, 0.5, 5, 10, 40, 50, 60, 100, 150, and 200 Hz
Pulse	30BPM and 60 BPM, 60 ms pulse width

R-Wave Detection

Waveform	Haver-triangle
Rates	30, 60, 80, 120, 200 and 250 BPM
Widths	8, 10, 12 and 20 to 200 (by 10) ms
Amplitudes	0.05 mV to 0.45 mV 0.05 mV hard return
	0.5 mV to 5 mV, in 0.5 mV steps
Accuracy	± (1 % setting + 1 ms)

Noise Immunity

Wave	Sine
Line Frequency	50 Hz or 60 Hz ( ± 0.5 Hz)
Amplitude	Range: 0.0 mV to 10 mV, in 0.5 mV steps
	Accuracy: ± 5 %

Transvenous Pacer Pulse Simulation

Widths	Range: 0.1, 0.2, 0.5, 1, and 2 ms.
	Accuracy: ± 5 % of setting
Amplitudes	Range: 0 (off) and ± 2, ± 4, ±6, ±8, ±10, ±12. ±14, ±16, ±18, ±20, ±50, ±100, ±200, ±500, ±700 mV
	Accuracy: ± (10 % setting + 0.2 mV)
Amplitude of Transvenous Pacer Pulse Simulation signals relative to amplitude setting (in percent)	Lead II reference:
	Lead I – 67 %
	Lead II – 100 %
	Lead III – 33 %
	Lead V1 – 67%
	Lead V2 – 67%
	Lead V3 – 67 %
	Lead V4 – 67 %
	Lead V5 – 67 %
	Lead V6 – 67 %
	Lead I reference:
	Lead I – 100 %
	Lead II – 150 %
	Lead III – 50 %
	Lead V1 – 100%
	Lead V2 – 100%
	Lead V3 – 100 %
	Lead V4 – 100 %
	Lead V5 – 100 %
	Lead V6 – 100 %

Arrhythmia Selections

Pacer Interactive (Transcutaneous Pacer, Impulse 7000DP only)	Demand: 30 BPM to 360 BPM, in 1 BPM steps Asynchronous Non-Capture Non-Function Threshold (interactive pacing simulation only): 10 mA to 250 mA in 10 mA steps
Supraventricular	Atrial Fibrillation Coarse Atrial Fibrillation Fine Atrial Flutter Sinus Arrhythmia Missed Beat Atrial Tachycardia Paroxysmal Atrial Tachycardia Nodal Rhythm Supraventricular Tachycardia
Premature	Atrial PAC Nodal PNC PVC1 Left Ventricle (LV) PVC1 Left Ventricle (LV) Early PVC1 Left Ventricle (LV) R on T PVC2 Right Ventricle (RV) PVC2 Right Ventricle (RV) Early PVC2 Right Ventricle (RV) R on T Multifocal PVCs (LV and RV)
Ventricular	PVCs 6/min PVCs 12/min PVCs 24/min Freq Multifocal Trigeminy Bigeminy Pair PVCs Run 5 PVCs Run 11 PVCs Monomorphic VTach: 120 to 300 (5 BPM steps) Polymorphic VTach: 5 selections Ventricular Fibrillation: Coarse and Fine Asystole
Conduction	1° Block 2° Block Type I 2° Block Type II 3° Block Right Bundle Branch Block (RBBB) Left Bundle Branch Block (LBBB)
Transvenous Pacemaker (ECG simulation only)	Atrial 80 BPM Asynchronous 75 BPM Demand with frequent sinus beats Demand with occasional sinus beats AV Sequential Non-Capture Non-Function

Selectable Pacer pulse Parameters for Transvenous Simulation (Atrial & Ventricular channels are independently selectable by the user)

Atrial Pacer Pulse (Note: relates only to the TV pacer)	Width: 0.1, 0.2, 0.5, 1, 2 ms Polarity: + or – Amplitude: 0 (off), 2 to 20 (by 2), 50, 100, 200, 500, 700 mV
Ventricular Pacer Pulse (Note: relates only to the TV pacer)	Width: 0.1, 0.2, 0.5, 1, 2 ms Polarity: + or – Amplitude: 0 (off), 2 to 20 (by 2), 50, 100, 200, 500, 700 mV

(BNC Jack)

Accuracy

± 5 % for 2 Hz Square Wave , 50Ω output impedance

Models and Accessories

Model Name

Description

Impulse 6000D

Impulse 6000D Defibrillator Analyzer 120 V – USAll models include:

USB Computer Communication Cable (cable assembly)
User Manual CD (CD-ROM)
Getting Started Guide (Manual)
Battery Eliminator (country specific)
Defib Paddle Contact Plates (FBC-IMP7000-8010)
Carrying Case (soft case)

Impulse 6000D-01

Impulse 6000D Schuko

Impulse 6000D-02

Impulse 6000D UK

Impulse 6000D-03

Impulse 6000D Japan

Impulse 6000D-04

Impulse 6000D Australia

Impulse 6000D-05

Impulse 6000D India

Impulse 6000D Defibrillator Analyzer Brazil

Impulse 6000D Brazil

Combination Defibrillator and Pacer Adapters
I6/7 D/P ADPT101	GE Marquette defib/pacer adapter (part# 3065423) (RESPONDER1500/1700 Series) (set of two) 4mm
I6/7 D/P ADPT104	Medtronic ERS/Physio-Control Defib/Pacer adapter (part# 3065461) (QUIK COMBO) 4mm
I6/7 D/P ADPT108	Philips/Agilent Defib/Pacer adapter (part# 3065509) HEARTSTART FR2/MRX 4mm
I6/7 D/P ADPT107	Philips/Agilent/HP Defib/Pacer adapter (part# 3065492) (CODEMASTER Series-Round) 4mm
I6/7 D/P ADPT109	Zoll Medical PD2200 Multi-Function Series electrodes (part# 3065511) M Series, M Series-CCT, R Series, E Series, AED Pro™ and AED Plus™ (Includes inline connector) (defib and pace) 4mm (AED Pro and AED Plus requires an auxiliary adapter part number: 8000-0804-01 available from Zoll Medical)

Defibrillator Adapters
FBC-IMP7000-8010	FBC-IMP7000-8010 defib plate (part# 3156262) This item number is for a single plate assembly. Each unit requires two.
I6/7 D/P ADPT102	Internal discharge paddle contacts (2) (4mm) (part# 3065438)
I6/7 D/P ADPT103	Kimberly Clark/R2 Darox MRL/MDE/NK: 4 mm defibrillator adapters (part# 3065450)
I6/7 D/P ADPT106	MedtronicERS/Physio-Control (part# 3065489) (FAST PATCH) (set of two) 4mm for Impulse 6000D/7000DP

Pacer Adapters
I6/7 D/P ADPT105	Medtronic ERS/Physio-Control pacer adapter (part# 3065477) (QUIK PACE) (set of two): 4 mm
I6/7 D/P ADPT110	Zoll Medical NTP/PD1400:4 mm pacer adapters (part# 3065527)