IDA-1S Infusion Device Analyzer - Image 2

IDA-1S Infusion Device Analyzer - Image 3

IDA-1S Infusion Device Analyzer - Image 4

IDA-1S Infusion Device Analyzer

Test a wide variety of infusion pumps quickly and accurately.

Categories: Fluke Biomedical, Infusion Device Analysers

Ensure infusion pumps are tested accurately and quickly with real time results using the IDA-1S One-Channel Infusion Device Analyzer, the newest member of the Fluke Biomedical IDA family. The IDA-1S infusion device analyzer is a portable, battery-operated instrument that allows for speedy verification when testing infusion device performance.

The IDA-1S infusion pump tester measures the flow rate and volume delivered, and the pressure generated in occlusions or blockages of the fluid line. The IDA-1S infusion device tester is based on sophisticated measurement technology trusted by biomedical professionals around the world.

It is easy to set up and requires little or no training to use. The IDA-1S infusion device analyzer can be used to test a wide variety of infusion pumps and an auto-start feature simplifies syringe pump testing and other tests that have long startup times.

Features

Integrated carrying handle and lightweight (2.7 lb) for easy portability
Battery powered with up to 10 hours of continuous operation for on-the-go operation
LCD touch screen for ease of use
Average and instantaneous flow measurement
Occlusion pressure measurements to 45 psi
Maximize accuracy with Autostart mode enabling unit to begin testing only when fluid is detected
Compatible with a wide variety of infusion pumps
Based on technology that is proven and trusted worldwide
On-board memory allows test results storage instantly
Hydrograph graphical software to control unit,display results and print results via PC
Global sales, service and support

Specifications

Flow rate measurement

Technique

Flow is calculated by measuring volume over time

Range

0.5 ml/h to 1000 ml/h

Accuracy

1 % of reading ±1 LSD for flows of 16 ml/h to 200 ml/h for volumes over 20 ml, otherwise 2 % of reading ±1 LSD for volumes over 10 ml under laboratory conditions.

Max test duration

10 hours on battery

Volume measurement

Technique

Volume measured directly by the measuring module in minimum sample sizes of 60 microliters

Range

0.06 ml to 999 ml

Accuracy

1 % of reading ±1 LSD for flow rates of 16 ml/h to 200 ml/h for volumes over 20 ml. Otherwise 2 % of reading ±1 LSD for volumes over 10 ml under laboratory conditions.

Max test duration

10 hours on battery

Pressure measurement

Technique (Occlusion test)

Direct measurement of pressure at the inlet port

Range

0 psi to 45 psi or equivalent in mmHg and kPa

Accuracy

1 % of full scale ±1 LSD under laboratory conditions

Max test duration

30 minutes

General specifications

Storage of results

Test results stored for later viewing, printing or transfer to PC. Typical practical capacity: 100 tests

Power Down

The results of tests in progress will be saved in the case of accidental power down

Computer control

The Product can be fully controlled from a PC using HydroGraph V3 software for IDA-1S

Battery power

4 x Panasonic HHR210AB NiMh 2000 mAh batteries

Charger

•Operating voltage range: 100V ac to 240V ac
•Supply frequency: 50Hz / 60 Hz
•Supply power: <20 VA

Size (HxWxD)

	30 cm x 17 cm x 10 cm
	(12 in x 8 in x 4 in)

Weight

~1.2 kg (2.7 lbs)

Safety

IEC 61010-1: Overvoltage category II, Pollution Degree 2

Electromagnetic environment

IEC 61326-1: Basic

Emissions classification

IEC CISPR 11: Group 1, Class A. Group 1 have intentionally generated and/or use conductively coupled radio-frequency energy which is necessary fpr the internal functioning of the equipment itself. Class A equipment is suitable for use in nondomestic locations and/or directly connected to a low-voltage power supply network

FCC

CFR47: Class A Part 15 subpart B

Electromagnetic compatibility

Applies to use in Korea only. Class A: Equipment (Industrial Broadcasting and Communication Equipment)¹

Altitude

0 m to 2000 m (0 ft to 6500 ft)

Temperature

Operating

15 °C to 30 °C (59 °F to 86 °F)

Storage

-20 °C to +40 °C (-4 °F to +104 °F) when drained of all liquid

Humidity

10 % to 90 % non-condensing

¹ This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and is not to be used in homes.

Models and Accessories

Model Name	Description	Price List
IDA-1S	IDA-1S One-channel Infusion Device Analyzer Included accessories: Hydrograph Software and Users Manual 20 ml syringe 3-way plastic Luerlock Drain tube (1 ml) Micro-90 bottle (225 ml) USB data transfer cable Power supply accessory (country-specific) Power cord NiMH replacement battery

Cables
USB Cable	USB Cable • for ProSim 2 & 3 (part# 1671807) • for Impulse 6000D/7000DP (part# 1626219) • for IDA-1S (part# 1626219) • for IDA-5 (part# 4354452)

Miscellaneous Accessories
20ML Syringe	Syringe, 20ML Syringe (Part #435014)
48457FG	48457FG Luerlock 3-way t-valve (part# 2391750) for IDA-5, IDA-1S, and IDA4 Plus
Drain tube	IDA-5 DRAIN TUBE,5-FT PLASTIC DRAIN LINE IDA-5 (Part #4354429)
MICRO-90	MICRO-90 bottle 225ml (part# 4541948)

IDA-1S Infusion Device Analyzer

Features

Specifications

Models and Accessories

Related products

Login